Preparing for an RV inspection is necessary to ensure a smooth thorough inspection.  To help you prepare, we have created a Pre-Inspection document with everything you need to know before your inspector arrives.  This ensures all systems are ready to be looked at as well as providing adequate space and powering up essential systems.  If these steps are followed it will allow the inspection to proceed as quickly as possible.

Our inspections begin at 9:00 AM and take a minimum of five hours so please make sure the unit is ready to go the night before to enhance the process so you can receive your report the same day.

 

NOTE:  Inspections CANNOT be completed while repairs are being made, the RV is being detailed, or times walk throughs are scheduled.

 

Space Required

• To extend and retract all slideout rooms and awnings.

• To safely move a ladder around the RV.

​​

RV Refrigerator

• RV type refrigerators must be on at least 12 hours prior to the inspection

​​

RV Propane

• Tanks must be at least ½ full

​​

Fuel to Test Generator

• RV Fuel must be at least ½ Full

​​

RV Hookups

• Shore power supply.  50A or 30A (110 V house supply is not recommended)

• City water connection.  If not available, the freshwater tank Must be Full

• Dewinterization must be performed prior to inspection time.

• Wastewater/ sewer hookups—preferred but not required.

​​

RV Keys and Personal Contents

• Most personal content should be removed or neatly stacked so inspection can occur.

• Keys to all areas must be available (Entrance Doors, Cargo Bays, Fuel Doors, and ignition.

• Wheel covers must be removed.

• The windshield cover must be removed.

• All electronic remotes should be all together on the counter.